C2060H Roller Chain | Heavy-Duty C2060H Chain - 10ft Box

C2060H roller chain is a double pitch heavy-duty series chain that is specifically manufactured for moderate to heavy-duty conveying applications. The purpose of a transmission roller chain is to transfer energy from the drive, but double pitch transmission chains have the added capability of providing an ample conveying surface and attachment surface because of their elongated pitch and straight sidebars. Our C2060H double pitch chain is manufactured dimensionally to ANSI B29.1 specifications and is extremely durable and of high strength. Each component that goes into this roller chain has been heat-treated, shot, peened, and pre-stretched at the factory to produce a long-lasting and high-performance C2060H chain. It features a solid roller design that allows for it to withstand higher shock loads as well as operate much longer than those that do not have the solid roller design. The shot peening and heat-treatment done to each component make this chain much more resistant to wear and the pre-stretching from the factory will greatly reduce initial stretch and stretch over time. This chain is typically supplied as 10' boxes but we also stock 50' reels and 100' reels for customers who need longer lengths. This chain is in stock in other configurations such as stainless steel, nickel-plated, coated, zinc-plated, and more.

C2060H Roller Chain Dimensions

• Pitch (P): 1.500"
• Roller Width (W): 0.500"
• Roller Diameter (R): 0.469"
• Plate Height (H): 0.683"
• Plate Thickness (T): 0.125"
• Pin Diameter (D): 0.234"
• Overall Width (F): 1.172"
• Tensile Strength: 10,300lbs
• Weight: 1.01lbs/ft

Important Note:
When looking for a C2060H roller chain (photo below on the left) it is important, not to mix it up with a C2062H roller chain (photo below on the right). This is a common and easy mistake to make because both of these chains are manufactured with the same side-plates, meaning that the part number stamped on the side of both chains is most likely "C2060H".
VS.

C2060H Roller Chain Strength

When it comes down to strengths for the C2060H roller chain there are two different ratings, the tensile strength, and the working load. When referring to the tensile strength for the C2060H roller chain there are three different ratings; minimum tensile strength, average tensile strength, and maximum tensile strength. These strengths are determined by strength tests done at the factory, we post our minimum tensile strength rating so undersized does not occur. The working load is the recommended maximum load that the chain is subject to during its day-to-day operations. This load is formulated with a variety of factors and scenarios taken into consideration. For the strongest C2060H chain take a look at our Premier Series C2060H roller chain.

C2060H Chain Applications

C2060H roller chain is found in a variety of applications, the most common of which are listed below:

• Industrial Conveyor Systems
• Live Bottom Trailers
• Agricultural Systems
• Food Processing (usually uses stainless steel C2060H)
• Citrus Processing

C2060H Roller Chain Sprockets

We also have a full line of premium quality C2060H roller chain sprockets. Refer to the below chart for the stock C2060H double pitch roller chain sizes. It's best to use special double pitch roller chain sprockets when a sprocket is under 30-teeth with double pitch chains so that the chain properly seats in the sprocket, failure of this often results in an unnecessary chain and sprocket wear.

Stock C2060H Roller Chain Sprockets

Sprocket Size	Tooth Count	Outside Diameter	Stock Bore	Maximum Bore	Length Thru Bore	Weight
2060B11	11	3.000"	3/4"	1"	1-1/4"	1.14 LBS
2060B12	12	3.250"	3/4"	1-1/4"	1-1/4"	1.46 LBS
2060B13	13	3.490"	3/4"	1-5/16"	1-1/4"	1.52 LBS
2060B14	14	3.740"	3/4"	1-9/16"	1-1/4"	1.86 LBS
2060B15	15	3.980"	3/4"	1-3/4"	1-1/4"	2.24 LBS
2060B16	16	4.220"	3/4"	1-27/32"	1-1/4"	2.64 LBS
2060B17	17	4.460"	3/4"	2-3/32"	1-1/4"	3.08 LBS
2060B18	18	4.700"	3/4"	2-9/32"	1-1/4"	3.56 LBS
2060B19	19	4.940"	3/4"	2-11/32"	1-1/4"	3.94 LBS
2060B20	20	5.190"	3/4"	2-9/16"	1-1/4"	4.50 LBS
2060B21	21	5.430"	3/4"	2-3/4"	1-1/4"	5.02 LBS
2060B22	22	5.670"	3/4"	2-3/4"	1-1/4"	5.26 LBS
2060B23	23	5.910"	3/4"	2-3/4"	1-1/4"	5.54 LBS
2060B24	24	6.150"	3/4"	2-3/4"	1-1/4"	5.90 LBS
2060B25	25	6.390"	3/4"	2-3/4"	1-1/4"	6.08 LBS
2060B26	26	6.630"	3/4"	2-3/4"	1-1/4"	6.36 LBS
2060B28	28	7.110"	3/4"	2-3/4"	1-1/4"	7.02 LBS
2060B30	30	7.590"	3/4"	2-3/4"	1-1/4"	7.54 LBS

C2060H Roller Chain Attachments

We can also supply C2060H attachment links or complete assembled attachment strands. Our stock C2060H attachments include A-1, A-2, K-1, K-2, SA-1, SA-2, SK-1, SK-2, D-1, and D-3 types. We stock attachments in standard carbon steel, stainless steel, nickel plated, and coated configurations. To request a quote on the attachment C2060H chain simply give us a call or visit our roller chain attachments section and fill out the request form.