Home > Chain MRO Parts > Roller Chain Tensioners > Rosta Tensioner Devices >

Rosta 06580901 RL11 Tensioning Roller For SE11 Tensioner

Rosta 06580901 RL11 Tensioning Roller
Rosta 06580901 RL11 Tensioning Roller


 


Product Code: 06580901-RL11-ROLLER
Get a Quote
Call to Order 407-347-3519

Description Technical Specs
 
Rosta 06580901 RL11 Tensioning Roller For SE11 Tensioner is a permanently lubricated roller that utilizes premium 2Z C3 shielded bearings. It has a broad operating temperature range of -31° to + 212° degrees Fahrenheit.

RL11 Tensioning Roller Dimensions


  • Type: RL11
  • Article Number: 06580901
  • Max Speed: 6000 RPM
  • Maximum Belt Width: 1.18"
  • Dimension (A): 1.18"
  • Dimension (B): 1.38"
  • Dimension (C): 0.12"
  • Dimension (D): 0.75"
  • Dimension (E): 0.39"
  • Dimension (F): M8
  • Torque Hex Nut: 18.4 (lb/ ft)
  • Works With Tensioner Type: SE-11
  • Weight: 0.18 LBS

Tensioning With Flat Roller on Belt Back


– The diameter of the flat tensioning roller should at least measure 2⁄3 of the diameter of the smallest pulley in the drive.
– The width of the tensioning roller should be at least 20% wider than the overall width of the belt set.
– Installation on the belt back in the slack span, make sure that the belts are maintaining sufficient contact-arc on the driver and driven pulley.
About Us
Features
    • High-Quality Roller
    • Made In Accordance With ANSI and ISO Standards
    • High-Strength Construction

Accessories
Rosta SE11G Tensioner | Oil Resistant SE-11G Tensioner 06011061 Rosta SE11 Tensioner Without Idler Hardware Rosta SE11 Tensioner | 61030002 SE-11 Tensioner Device
Oil Resistant Rosta SE11G Tensioner 06011061 Rosta SE11 Tensioner Rosta SE11 Tensioner

Share your knowledge of this product. Be the first to write a review »