Home > Chain MRO Parts > Roller Chain Lubricant

Roller Chain Lubricant

Like bearings need grease, roller chains need lubricant. At USA Roller Chain we have the largest selection of roller chain oil lubricants and lubrication systems. Ranging from food-grade, high-temp, low-temp, and even dry we're sure to have the roller chain lubricant for your application. Proper roller chain lubricating not only improves the life of the chain, but it also improves sprocket life and reduces noise and shock loads. Lubrication can increase the life and performance of any roller chain, regardless of chain grade/ quality level ann material. The lubricant types that we supply are specially formulated for industrial and manufacturing uses, and they are all proven performers in the industry

Roller Chain Lubrication Placement

Proper placement of lubricant is essential for obtaining the optimal life out of your roller chain and lubricant.

  • A - Apply roller chain lubricant between the roller and inner side-plate, this disperses the lube between the roller and bushing.
  • B - Apply Apply roller chain lubricant between the inner and outer side-plates to lubricate the plates where they contact each other and the pin for an optimal pin on bushing contact.

Lube Free Roller Chain

in applications where proper lubrication is uneconomical or impractical, we also supply a lube-free roller chain that does not require additional lubrication.

Roller Chain Oiling Types

There are several standardized practices adopted by the power transmission industry for applying and or keeping roller chain lubrication on the chain. The below chart displays some of these practices and methods. Regardless of your specific method, we have the chain lube you need!
Oiling Type
Oiling Method
Figure
Manual Lubrication Apply oil manually with filler or brush as needed.
Grip Lubrication A consistent drop of oil onto the roller chain as many times as needed per hour.
Disc Lubrication Disc rotor transporting oil from a pan that splashes onto the sprocket and chain.
Oil Bath Lubrication Chain and sprocket casing that acts as an oil pan where the chain is dipped in oil at the bottom of the system.
Spray Lubrication Oil pump circulating and spraying oil onto the chain within an enclosed casing.

Roller Chain Lubricant Types

The below charts show our standard chain oil lubricants, additional types are also available upon request. If you need assistance with selecting the right lubricant for your application please contact our customer support team at (407) 347-3519 or email sales@usarollerchain.com.

LU620 ANTI-SEIZE COMPOUND


The LU620 compound is made for preventive maintenance in applications such as; marine, metalworking, automotive, oil field, construction, mining, farm equipment, and sewage/ wastewater. For additional product information select part # below.
Part #
Container Size
Series
SC0620000 16oz Aerosol Can LU620
S62008000 8oz / 226g Brush Top Jar LU620
SC0620TB0 16oz / 453g Brush Top Jar LU620

LU621 FOOD GRADE ANTI-SEIZE COMPOUND


LU621 compound is engineered to provide an anti-seize superior leak-proof seal for the life of the connection. It is considered a food-grade crease and allows for easy disassembly without thread damage. For additional product information select part # below.
Part #
Container Size
Series
S00621000 16oz Aerosol Can LU621

LU200 DRY FILM MOLY LUBRICANT


LU200 compound is a molybdenum dry film lubricant that bonds to all clean surfaces. For additional product information select part # below.
Part #
Container Size
Series
SC0200000 16oz Aerosol Can LU200
SC0200050 5 Gallon Bucket LU200
S20055000 55 Gallon Drum LU200

LU204 DRY FILM MOLY LUBRICANT


LU204 compound is a graphite dry film high-lubricity lubricant that adheres to most surfaces with minimum surface preparation. For additional product information select part # below.
Part #
Container Size
Series
SC0204000 16oz Aerosol Can LU204
S00204INV 13oz Inverted Aerosol LU204
SC0204LQ0 16oz Spray Bottle LU204
S20405000 5 Gallon Bucket LU204

LU708 DRY FILM MOLY LUBRICANT


LU708 compound is a high-performance PTFE dry film lubricant that is one of the most versatile lubricants available. For additional product information select part # below.
Part #
Container Size
Series
SC0708000 16oz Aerosol Can LU708
SC0708LQ0 16oz Spray Bottle LU708
S70805000 5 Gallon Bucket LU708

LU103 RUST BREAKER PENETRANT


This LU103 compound quickly loosens rust while penetrating grease and dirt. For additional product information select part # below.
Part #
Container Size
Series
SC0103000 16oz Aerosol Can LU103
SC0103LQ0 16oz Spray Bottle LU103
S10301000 1 Gallon Can LU103
S10305000 5 Gallon Bucket LU103

LU202 MOLY CHAIN LUBRICANT


The LU202 lubricant is a high viscosity oil that clings to moving parts and penetrates close tolerances of a chain. Moly chain lube has become one of the staple lubricants for the roller chain. For additional product information select part # below.
Part #
Container Size
Series
SC0202000 16oz Aerosol Can LU202
SC0202LQ0 16oz Spray Bottle LU202
SC0202050 5 Gallon Bucket LU202

LU104 FOOD GRADE PENETRATING OIL


The LU104 is made to quickly penetrate nuts and bolts. For additional product information select part # below.
Part #
Container Size
Series
S00104000 20oz Aerosol Can LU104

LU205 FOOD GRADE CHAIN LUBRICANT


LU205 chain lube is treated with the most effective anti-oxidants, extreme pressure, anti-wear, and corrosion protection. For additional product information select part # below.
Part #
Container Size
Series
S00205000 20oz Aerosol Can LU205

LU207 FOOD GRADE SYNTHETIC GREASE


The LU207 pure synthetic grease is a multi-surface, non-melting, waterproof grease that is fortified with P.T.F.E designed specifically to lubricate, seal out water, and resist chemical attack. For additional product information select part # below.
Part #
Container Size
Series
S00207000 20oz Aerosol Can LU207

LU209 FOOD GRADE SYNTHETIC OIL


The LU209 oil is a waterproof synthetic lubricating fluid that does not emulsify with water and has excellent extreme pressure characteristics. For additional product information select part # below.
Part #
Container Size
Series
S00209000 20oz Aerosol Can LU209

LU208 CUTTING OIL


The LU208 cutting oil is specifically formulated for all ferrous and non-ferrous machining operations. LU208 extends the overall life of tools and reduces the need for tool sharpening and downtime. For additional product information select part # below.
Part #
Container Size
Series
SC0208000 16oz Aerosol Can LU208
SC0208LQ0 16oz Spray Bottle LU208
S20805000 5 Gallon Bucket LU208

LU213 FOOD GRADE HIGH TEMP LUBRICANT


LU213 compound is made with the most effective anti-oxidants, extreme-pressure, anti-wear, and anti-corrosive additives. For additional product information select part # below.
Part #
Container Size
Series
S00213000 20oz Aerosol Can LU213

LU214 FOOD GRADE LOW-TEMPERATURE LUBRICANT


LU214 Lubricant is a multi-service compound made for usage in extremely low-temperature applications as low as -78°F. For additional product information select part # below.
Part #
Container Size
Series
S00214000 16oz Aerosol Can LU214

LU700 FOOD GRADE MACHINERY OIL


The LU700 compound is the perfect oil lubricant for general applications that need something to penetrate and loosen dirt, scale, and corrosion. For additional product information select part # below.
Part #
Container Size
Series
SC0700000 16oz Aerosol Can LU700
SC0700LQ0 16oz Spray Bottle LU700
S70005000 5 Gallon Bucket LU700

LU402 ECO-GRADE GENERAL PURPOSE LUBRICANT AND PENETRANT


The LU402 is one of the only biodegradable three in one penetrant and lubricants available! The product is a proven performer in the industry while remaining biodegradable. For additional product information select part # below.
Part #
Container Size
Series
SC0402000 16oz Aerosol Can LU402

LU701 FOOD GRADE MACHINERY OIL


LU701 compound is utilized in applications within beverage and food processing equipment because it is a high-purity white mineral oil that loosens rust, dirt, scale, and corrosion. For additional product information select part # below.
Part #
Container Size
Series
S00701000 20oz Aerosol Can LU701

LU727 HIGH-PERFORMANCE WET LUBRICANT


The LU727 lubricant sets its self apart from others by having the capabilities to penetrate deep into corroded areas to clean and dissolve rust, greases, and dirt in even the tightest of tolerances. For additional product information select part # below.
Part #
Container Size
Series
SC0727000 16oz Aerosol Can LU727

LU711 THE PROTECTOR ALL-PURPOSE LUBRICANT


The LU711 is a high-quality general purpose lubricant that can be used in almost any application with maximum moisture displacement while creating an ultra-thin film that resists the collection of abrasive particles. For additional product information select part # below.
Part #
Container Size
Series
SC0711000 16oz Aerosol Can LU711
SC0711LQ0 16oz Spray Bottle LU711
S71101000 1 Gallon Can LU711
S71105000 5 Gallon Bucket LU711
S71155000 55 Gallon Drum LU711

LU728 NON-FLAMMABLE SYNTHETIC LUBRICANT


LU728 compound is engineered specifically for applications requiring a safe, low HMIS rating, non-flammable lubricant. This lubricant possesses all of the same characteristics of a premium synthetic lubricant. For additional product information select part # below.
Part #
Container Size
Series
SC0728000 16oz Aerosol Can LU728

LU100 WHITE LITHIUM GREASE


The LU100 compound is a high solids, white grease, that provides excellent lubrication for metal-to-metal applications. For additional product information select part # below.
Part #
Container Size
Series
SC0100000 16oz Aerosol Can LU100
SC0100LQ0 16oz Spray Bottle LU100
S10005000 5 Gallon Bucket LU100

LU101 FOOD GRADE WHITE GREASE


The LU101 compound is a high solids, high-purity food-grade complex with superior metal-to-metal characteristics. For additional product information select part # below.
Part #
Container Size
Series
S00101000 20oz Aerosol Can LU101

LU102 MULTI-PURPOSE RED GREASE


LU102 grease delivers superior metal-to-metal characteristics by coating, penetrating, and then curing to a semi-solid film. For additional product information select part # below.
Part #
Container Size
Series
S00102000 16oz Aerosol Can LU102

LU201 OPEN GEAR AND WIRE ROPE LUBRICANT


The LU201 compound is a high-performance lubricant that penetrates metal surfaces and even will reach the core of a wire rope. For additional product information select part # below.
Part #
Container Size
Series
SC0201000 16oz Aerosol Can LU201
SC0201LQ0 16oz Spray Bottle LU201

LU510 FOOD GRADE SYNTHETIC HIGH-TEMPERATURE GREASE


The LU510 grease is a versatile, premium quality grease fortified with P.T.F.E, it utilizes some of the most advanced lubricating technology to provide maximum protection within an extremely broad temperature range (-75°F to over 500°F). For additional product information select part # below.
Part #
Container Size
Consistency
S00510005 5 Gallon Bucket NLGI 0
S00510015 15 Gallon Drum NLGI 0
S00510055 55 Gallon Drum NLGI 0
S00511005 5 Gallon Bucket NLGI 1
S00511015 15 Gallon Drum NLGI 1
S00511055 55 Gallon Drum NLGI 1
S00512014 14oz Cartridge NLGI 2
S00512005 5 Gallon Bucket NLGI 2
S00512015 15 Gallon Drum NLGI 2
S00512055 55 Gallon Drum NLGI 2

LU520 FOOD GRADE MULTI-PURPOSE SEMI-SYNTHETIC GREASE


The LU520 grease is engineered and designed mainly for general lubrication in food processing facilities and provides excellent film-forming characteristics and anti-wear qualities. For additional product information select part # below.
Part #
Container Size
Consistency
S00520005 5 Gallon Bucket NLGI 0
S00520015 15 Gallon Drum NLGI 0
S00520055 55 Gallon Drum NLGI 0
S00521005 5 Gallon Bucket NLGI 1
S00521015 15 Gallon Drum NLGI 1
S00521055 55 Gallon Drum NLGI 1
S00522014 14oz Cartridge NLGI 2
S00522005 5 Gallon Bucket NLGI 2
S00522015 15 Gallon Drum NLGI 2
S00522055 55 Gallon Drum NLGI 2

LU710 WAXY FILM PROTECTANT


The LU710 protectant is designed to be a long-term metal protectant with high solids, corrosion prevention, and is suitable for an extensively wide range of applications. For additional product information select part # below.
Part #
Container Size
Series
SC0710000 16oz Aerosol Can LU710

LU737 SYNTHETIC DRY PROTECTANT


This LU737 protectant is a transparent non-staining dry film that clears, penetrates, lubricates, and displaces moisture. For additional product information select part # below.
Part #
Container Size
Series
SC0737000 16oz Aerosol Can LU737
S73701000 1 Gallon Can LU737
S73705000 5 Gallon Bucket LU737

LU767 INDOOR METAL PROTECTANT


The LU767 compound is a medium weight oil formulated for excellent lubrication, superior protection against corrosion, moisture penetration, and excellent penetration properties. For additional product information select part # below.
Part #
Container Size
Series
SC0767000 16oz Aerosol Can LU767
S76701000 1 Gallon Can LU767
S76705000 5 Gallon Bucket LU767

LU777 OUTDOOR METAL PROTECTANT


The LU777 compound really shows its performance in areas that have high humidity and even salt-spray. It provides a waxy tacky film that acts as a barrier to corrosion while providing excellent lubrication at the same time. For additional product information select part # below.
Part #
Container Size
Series
SC0777000 16oz Aerosol Can LU777
SC0777LQ0 16oz Spray Bottle LU777
S77701000 1 Gallon Can LU777
S77705000 5 Gallon Bucket LU777

LU1324 HIGH-PERFORMANCE SILICONE LUBRICANT


The LU1324 is a silicone rich formula that lubricates and protects in a wide verity of applications, it can even be used on wood, metal, rubber, plastics, leather, vinyl canvas or painted surfaces. For additional product information select part # below.
Part #
Container Size
Series
SC1324000 16oz Aerosol Can LU1324

LU206 ALL-PURPOSE SILICONE LUBRICANT


The LU206 lubricant is a 5% low-viscosity silicone formula that is compatible with a wide range of surfaces, repels water, and is not corrosive to metals. For additional product information select part # below.
Part #
Container Size
Series
SC0206000 16oz Aerosol Can LU206
SC0206LQ0 16oz Spray Bottle LU206
S20605000 5 Gallon Bucket LU206

LU211 FOOD GRADE DRY SILICONE


The LU211 compound creates an ultra-thin film on a surface that won't attract dirt or dust, because of its properties, it is considered a low viscosity lubricant that is compatible with most surfaces. For additional product information select part # below.
Part #
Container Size
Series
S00211000 20oz Aerosol Can LU211

LU905 HEAVY DUTY SILICONE LUBRICANT


LU905 lubricant is designed to withstand medium loads and pressure by containing a heavy concentration of high-viscosity silicone. For additional product information select part # below.
Part #
Container Size
Series
SC0905000 16oz Aerosol Can LU905

LU212 FOOD GRADE SILICONE LUBRICANT


The LU212 Compound is designed for most surfaces and can work in a broad temperature range as low as -40°F and up to 450°F. It repels water and is non-corrosive to metals. For additional product information select part # below.
Part #
Container Size
Series
S00212000 20oz Aerosol Can LU212

LU910 FOOD GRADE SILICONE LUBRICANT


The LU910 lubricant is made to prevent sticking without transferring into end-result products, it's colorless, odorless, and tasteless. For additional product information select part # below.
Part #
Container Size
Series
SC0910000 16oz Aerosol Can LU910

LU210 FOOD GRADE SILICONE LUBRICANT


The LU210 compound is made with a 5% low-viscosity silicone formula that repels water, is non-corrosive to metals, and is compatible with most surfaces. For additional product information select part # below.
Part #
Container Size
Series
SC0210000 16oz Aerosol Can LU210
SC0210LQ0 16oz Spray Bottle LU210
S21005000 5 Gallon Bucket LU210
S21055000 55 Gallon Drum LU210





Sort By:
1 2 3
   
 
1 2 3