Home > Roller Chain > More Roller Chains > Double Pitch Roller Chain > C2080H Conveyor Chain
Find by Pricing

C2080H Conveyor Chain

C2080H conveyor chain features a 2" pitch and is manufactured for industrial conveying applications. We keep these chains in stock in three different quality levels, Economy Plus, General Duty Plus, and Premier Series.

Economy Plus C2080H chain is manufactured to ANSI standards, features solid rollers, and uses heat treated components. The tensile strength of this chain is 17,300 LBS

General Duty Plus C2080H chain is also manufactured to ANSI standards, has solid rollers and heat-treated components. The components of this series are higher precision and use better raw materials for good long-term performance.

Premier Series C2080H chain uses the best quality components, has solid bushings and solid rollers, has gone through several different specialty manufacturing processes to ensure that this chain has the best performance and highest strength.

Important Note:
When looking for C2080H conveyor chain (photo below on the left) it is important to not mix it up with
C2082H roller chain (photo below on the right). This is a common and easy mistake to make because both of these chains are manufactured with the same side-plates, meaning that the part number stamped on the side of both chains is most likely "C2080H".
VS.

Sort By:
1 2
   
 
1 2

C2080H Conveyor Chain Sprockets

When deciding on sprockets for you C2080H chain it is important to keep in mind that you should use special double pitch roller chain sprockets when the tooth count is 30 or below. This is because standard roller chain sprockets does not allow for the roller to properly engage with the tooth fully. This causes premature wear on both the chain and sprocket! We stock a full line of C2080H sprockets, checkout the below chart for the stock sizes.

Stock C2080H Roller Chain Sprockets
Sprocket Size Tooth Count Outside Diameter Stock Bore Maximum Bore Length Thru Bore Weight
2080B11 11 4.010" 1" 1-1/2" 1-5/8" 2.5 LBS
2080B12 12 4.330" 1" 1-11/16" 1-5/8" 3.2 LBS
2080B13 13 4.660" 1" 1-25/32" 1-1/2" 3.3 LBS
2080B14 14 4.980" 1" 2-1/8" 1-1/2" 4.0 LBS
2080B15 15 5.300" 1" 2-9/32" 1-1/2" 4.8 LBS
2080B16 16 5.630" 1" 2-17/32" 1-1/2" 5.7 LBS
2080B17 17 5.950" 1" 2-3/4" 1-1/2" 6.4 LBS
2080B1818 6.270" 1" 2-3/4" 1-1/2" 7.4 LBS
2080B19 19 6.590" 1" 2-3/4" 1-1/2" 7.7 LBS
2080B20 20 6.910" 1" 2-3/4" 1-1/2" 8.3 LBS
2080B21 21 7.230" 1" 2-3/4" 1-3/4" 9.4 LBS
2080B22 22 7.560" 1" 2-3/4" 1-3/4" 10.0 LBS
2080B23 23 7.880" 1" 2-3/4" 1-3/4" 10.5 LBS
2080B24 24 8.200" 1" 2-3/4" 1-3/4" 11.1 LBS
2080B25 25 8.520" 1" 2-3/4" 1-3/4" 12.0 LBS
2080B26 26 8.840" 1-1/4" 3-1/4" 2" 14.8 LBS
2080B28 28 9.480" 1-3/16" 3-1/4" 2" 16.6 LBS
2080B30 30 10.110" 9.620" 3-1/4" 2" 17.8 LBS