Home > Power Transmission > Screw Conveyors For Bulk Material Handling | Auger Conveyors > Helicoid Conveyor Screws | Helicoid Flighting >

9" Screw Flighting Only X 9' 10" Long | 9H312 - Right

9H312-120-0633 Screw Flighting


Product Code: 7222-9H312-120-0633
Contact Us For Pricing & Availability

Description Technical Specs
9H312-120-0633 helicoid conveyor screw flighting is a right-hand 9" diameter, standard length in this size is 9ft 10" long and it is manufactured from heavy-duty steel, the flight thickness next to the anticipated pipe is 3/8" and 3/16" on the flighting outer edge. Flighting only is used for applications where you may only need a section or in circumstances where a special pipe or pre-existing pipe can be re-used. 9" diameter screw flighting is made into one continuous helix with the use of special helicoid forming machines, raw carbon steel material in the form of strips are fed into this machine and cold-formed as they go through a set of cone-shaped dies, from the process the material is compressed at the outer edges of the flight making it thinner than the inner edges, then the surface of the flight actually come out hardened due to it being cold rolled from the dies making it more abrasion resistant and stronger. The end result is a work-hardened smooth finished screw flighting length that is ready for operation. 9" diameter helicoid conveyor screw flighting is superior to other types due to its diameter, pitch, and thickness being closely controlled throughout the manufacturing process. The flighting is typically secured to the pipe by intermittent welds and high-strength welded steel lugs for maximum hold. These right-hand 9" diameter screw flights are able to be assembled in conjunction with each other to produce screw conveying systems as long as 150ft. For additional information or to get a quote please contact our customer support team and we will be happy to assist you.

9H312-120-0633 Conveyor Screw Flighting Dimensions

  • Part #: 9H312-120-0633
  • Configuration: Right-Hand
  • Flighting Diameter: 9"
  • Standard Length: 9' 10"
  • Weight: 62LBS
  • Flight Thickness Next to Pipe (B): 3/8"
  • Outer Edge Flight Thickness (C): 3/16"
  • Standard Pipe Inside Diameter: 2"
  • Outside Diameter of Standard Pipe: 2-3/8"
  • Standard Coupling Diameter (A): 1-1/2"
  • Note: Screw Flighting Only
Screw Conveyors
    • Precision Conveyor Screw Flighting
    • Cold-Rolled for Smooth and Hardened Finish
    • Closely Controlled Pitch, Diameter, and Thickness
    • Available in Additional Materials
    • Can be Coupled With Other Screws up to 150ft

Share your knowledge of this product. Be the first to write a review »