Home > Power Transmission > Screw Conveyors For Bulk Material Handling | Auger Conveyors > Screw Conveyor Supporting Feet - Saddles - Flanges

Screw Conveyor Supporting Feet - Saddles - Flanges

Supporting feet, saddles, and flanges all play a role in the construction of screw conveyors. We furnish these components out of high-quality heavy-duty steel for long term operation. We can also furnish these parts from abrasion-resistant materials or to custom dimensions per the customers' request.

Screw Conveyor Supporting Feet


Supporting feet are designed in a way that creates the means of aligning and fastening the trough to the floor or an existing structure at the trough joints. The trough end height is accurately maintained and the feet permit the removal of a trough end without disturbing the entire unit.

Conveyor Diameter Part # Weight (LBS) (E) (F) (G) (H) (J) (L)
4" 335-0147 1-1/2 4-5/8" 3/16" 5-3/4" 7/8" 1-1/2" 3/8"
6" 335-0212 2 5-5/8" 3/16" 8-1/8" 7/8" 1-1/2" 3/8"
9" 335-0287 4-1/2 7-7/8" 3/16" 9-3/8" 1-5/16" 2-1/2" 1/2"
10" 335-0352 5 8-7/8" 3/16" 9-1/2" 1-9/16" 2-11/16" 1/2"
12" 335-0428 6 9-5/8" 3/16" 12-1/4" 1-3/8" 2-1/2" 5/8"
14" 335-0493 7 10-7/8" 1/4" 13-1/2" 1-3/8" 2-1/2" 5/8"
16" 335-0568 7-1/2 12" 1/4" 14-7/8" 1-3/4" 3" 5/8"
18" 335-0634 9-1/2 13-3/8" 1/4" 16" 1-3/4" 3" 5/8"
20" 335-0709 12-1/2 15" 1/4" 19-1/4" 2" 3-1/2" 3/4"
24" 335-0774 14-1/2 18-1/8" 1/4" 20" 2-1/4" 4" 3/4"

Screw Conveyor Saddles


Saddles are used to support the screw conveyor trough between the trough sections and fasten to the floor or existing structures. The total height from the floor is the same as for the trough end with feet.

Conveyor Diameter Part # Weight (LBS) (E) (F) (G) (H) (J) (L)
4" 337-0145 1-1/2 4-5/8" 3/16" 5-3/4" 7/8" 1-1/2" 3/8"
6" 337-0210 2 5-5/8" 3/16" 8-1/8" 7/8" 1-1/2" 3/8"
9" 337-0285 4-1/2 7-7/8" 3/16" 9-3/8" 1-5/16" 2-1/2" 1/2"
10" 337-0350 5 8-7/8" 3/16" 9-1/2" 1-9/16" 2-11/16" 1/2"
12" 337-0426 6 9-5/8" 3/16" 12-1/4" 1-3/8" 2-1/2" 5/8"
14" 337-0491 7 10-7/8" 1/4" 13-12" 1-3/8" 2-1/2" 5/8"
16" 337-0566 8 12" 1/4" 14-7/8" 1-3/4" 3" 5/8"
18" 337-0632 10 13-3/8" 1/4" 16" 1-3/4" 3" 5/8"
20" 337-0707 13 15" 1/4" 19-1/4" 2" 3-1/2" 3/4"
24" 337-0772 15 18-1/8" 1/4" 20" 2-1/4" 4" 3/4"

Screw Conveyor Flanges


These specially designed Nu-Weld end flanges are manufactured from heavy-gauge steel to assure a secure, close, and accurate fitment with the conveyor trough and the trough ends or the following end flange. The bolt holes are precision jig-punched to assure accurate alignment when installed.

Conveyor Diameter Light Trough Part # Heavy Trough Part # Weight (LBS) (A) (B) (C) (D) Bolt Size (M) Bolt #
4" 332-0223 -- 1-1/2 5-1/4" 8" 3-5/8" 3/16" 3/8" 6
6" 332-0330 332-1757 2 7-1/4" 9-3/4" 4-1/2" 3/16" 3/8" 6
9" 332-0447 332-1874 3 10-1/4" 13-1/2" 6-1/8" 3/16" 3/8" 8
10" 332-0553 332-1981 4 11-1/4" 14-1/2" 6-3/8" 3/16" 3/8" 8
12" 332-0660 332-2096 5 13-1/4" 17-1/4" 7-3/4" 1/4" 1/2" 8
14" 332-0777 332-2203 6-1/2 15-1/4" 19-1/4" 9-1/4" 1/4" 1/2" 8
16" 332-0884 332-2310 7-1/2 17-1/4" 21-1/4" 10-5/8" 1/4" 5/8" 8
18" 332-1320 332-1320 10-1/2 19-1/4" 24-1/4" 12-1/8" 1/4" 5/8" 10
20" 332-1437 332-1437 11-1/2 21-1/4" 26-1/4" 13-1/2" 1/4" 5/8" 10
24" 332-1544 332-1544 13-1/2 25-1/4" 30-1/4" 16-1/2" 1/4" 5/8" 12

Sort By:
1 2 3
   
 
1 2 3