Home > Chain MRO Parts > Roller Chain Tensioners > Rosta Tensioner Devices >

Rosta 06530002 T40BB15 Sprocket For SE27 Tensioner

Rosta 06530002 T40BB15 Sprocket
Rosta 06530002 T40BB15 Sprocket

Alternative Views:

Product Code: 06530002-SPROCKET-WHEEL-SET
Get a Quote
Call to Order 407-347-3519

Description Technical Specs
The Rosta 06530002 T40BB15 idler sprocket for SE27 tensioners is manufactured to ANSI and ISO standards and is made from high-quality steel. It has 15 teeth and runs #40-3 triple roller chain for size SE 27 tensioners. For more information or to get a quote please contact us and we will be happy to assist you!

06530002 T40BB15 Sprocket Dimensions

  • Sprocket Size: T40BB15
  • Article Number: 06530002
  • Tooth Count: 15
  • Works With Chain Size: 40-3
  • Dimension (W): M12
  • Dimension (L): 80mm
  • Torque Hex Nut 0.5 d (Nm): 35
  • Works With Tensioner Type: SE-27
  • Adjustable Range (R) with SE: 41-51
  • Weight: 0.50 kG

Mounting Instructions for Chain Drives

Standard Positioning:

The ROSTA tensioning device should be placed on the slack side of the chain drive, close by the smaller sprocket wheel in order to enlarge its contact-arc, therefore contact application from the outer side of drive. In mounted position, the tensioner-arm should stay close to parallel to the chain run, in drain direction. By extremely long chain drives it is recommendable to install several tensioners or the type “Boomerang®” in order to enlarge the slack compensation.
Reversible Chain Drive:

By reversible chain transmissions, it is recommendable to install a tensioner on each side of the chain-strands. Due to the alternate occurring of the slack, both tensioners should only be pre-tensioned up to max. 20°, in order to retain a reset-path of 10°, when strains are changing from slack span on working span in reversible applications.
Sprocket Teeth in Mesh:

By the initial tensioning of the chain, at least three teeth of the tensioner sprocket wheel should be in mesh with the rollers. The min. distance between the sprocket wheel of the tensioner to the next sprocket wheel in the chain drive should be at least four chain-pitches.
Adjustment of Chain Track:

The wheel of the sprocket wheelset is adjustable according to the position of the chain drive track. The wheel is positioned between two nuts on the threaded shaft. In changing the adjustment band “R”, the track of the tensioner wheel can be set according to the relevant strand course. After positioning the sprocket, re-tighten the two nuts on the side. The counter-nut “B” remains always tightened.
About Us
    • High-Quality Sprocket
    • Made In Accordance With ANSI and ISO Standards
    • High-Strength Construction

Rosta SE27 Tensioner | 61030005 SE-27 Tensioner Device Rosta SEB27 Tensioner | Boomerang SEB-27 Tensioner Device Rosta SE27G Tensioner | Oil Resistant SE-27G Tensioner Rosta SE27W Tensioner | Heat Resistant SE-27W Tensioner
Rosta SE27 Tensioner Rosta SEB27 Boomerang Tensioner Oil Resistant Rosta SE27G Tensioner Heat Resistant Rosta SE27W Tensioner
Rosta SEFE27 Tensioner | Front Mounting SEFE-27 Tensioner 06011064 Rosta SE27 Tensioner Without Idler Hardware Rosta SEI27 Stainless Steel Tensioner | SEI-27 Tensioner Rosta SEF27 Tensioner | Front Mounting SEF-27 Tensioner
Rosta SEFE27 Front Mounting Tensioner 06011064 Rosta SE27 Tensioner Rosta SEI27 Stainless Steel Tensioner Rosta SEF27 Front Mounting Tensioner

Share your knowledge of this product. Be the first to write a review »