Home > Roller Chain Tools, Repair & Accessories > Roller Chain Tensioners > Rosta Tensioner Devices >

Rosta 06580003 R27 Tensioning Roller For SE27 Tensioner

Rosta 06580003 R27 Tensioning Roller

Product Code: 06580003-R27-ROLLER

Description

Technical Specs

Rosta 06580003 R27 Tensioning Roller For SE27 Tensioner is a permanently lubricated roller that utilizes premium 2Z C3 shielded bearings. It has a broad operating temperature range of -31° to + 212° degrees Fahrenheit.

R27 Tensioning Roller Dimensions

Type: R27
Article Number: 06580003
Max Speed: 6000 RPM
Maximum Belt Width: 2.17"
Dimension (A): 2.36"
Dimension (B): 2.36"
Dimension (C): 0.31"
Dimension (D): 0.67"
Dimension (E): 0.31"
Dimension (F): M12
Torque Hex Nut: 25.8 (lb/ ft)
Works With Tensioner Type: SE-27
Weight: 0.88 LBS

Tensioning With Flat Roller on Belt Back

– The diameter of the flat tensioning roller should at least measure 2⁄3 of the diameter of the smallest pulley in the drive.
– The width of the tensioning roller should be at least 20% wider than the overall width of the belt set.
– Installation on the belt back in the slack span, make sure that the belts are maintaining sufficient contact-arc on the driver and driven pulley.