Home > Power Transmission > Sprockets > Engineer Class Sprockets > 348-Series Sprockets

348-Series Sprockets

348 series engineer class sprocket are used for a wide verity of chain sizes. These sizes include X348, S348, N348, and 348. These sprockets are typically supplied as cast material but we can also supply them as steel for longer operation. The below chart show the standard tooth counts as well as dimensions for each size. To get a quote on the sprocket or chain please contact us or fill out the below request form and we will be happy to assist you.



Cast 348-Series Sprockets


Note: Tooth Face at Pitch Line: 0.687"/ Roller Diameter: 1.0625"
Sprocket Size Tooth Count Style Pitch Diameter Hub Diameter Length Thru Bore Maximum Bore Weight (LBS)
348C4 4 C 7.92" 4.00" 4.00" 2.00" 11.0
348C5 5 C 9.71" 4.00" 4.00" 2.00" 19.0
348C6 6 C 11.59" 5.00" 4.00" 3.00" 24.0
348C7 7 C 13.48" 5.00" 4.00" 3.00" 43.0
348C8 8 C 15.54" 5.00" 4.00" 3.00" 43.0
348C9 9 C 17.28" 7.00" 4.00" 5.00" 51.0
348C10 10 C 19.18" 7.00" 4.00" 5.00" 68.0
348C11 11 C 21.03" 7.00" 4.00" 5.00" 75.0
348C12 12 C 22.98" 7.00" 4.00" 5.00" 83.0
348C16 16 C 30.60" 7.00" 4.00" 5.00" 120.0
348C19 19 C 36.33" 7.00" 4.00" 5.00" 159.0



Sort By:
1
Cast 348C10 Sprocket Cast 348C11 Sprocket Cast 348C12 Sprocket Cast 348C16 Sprocket
Cast 348C19 Sprocket Cast 348C4 Sprocket Cast 348C5 Sprocket Cast 348C6 Sprocket
Cast 348C7 Sprocket Cast 348C8 Sprocket Cast 348C9 Sprocket
   
 
1

Requesting 348-Series Sprockets

To get a quote on 348-Series Sprocket simply fill out the request for quote from and someone from our customer service team will contact you. Please note that if you don't see the sprocket size you need above send us an email or give us a call.


Company Name:
Contact Name:
Email Address:
Phone Number:
Sprocket Size:
Chain Size:
Tooth Count:
Hub Type (A-plate, B-Hub, C-Hub, other):
Length Thru Bore:
Bore Size/ Type (plain, finished w/ key-way & set screws, or other):
Preferred Material (steel, cast, or other):
Quantity Needed:

Additional Information or Notes:


Please enter the following code into the box provided: